MeanWell 32A 5V 160W Switching Power Supply (LRS-200E-5).
MEANWell LRS-200E-5 Switching Power Supply LED Display Product Specifications :
| Model | LRS-200E-5 | |
| Kirish | Voltage Range (Eslatma 4) | 180 ~ 264VAC / 180 ~ 264VAC by switch 254 ~ 370VDC |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| AC CURRENT | 4.5A/115VAC 2.5A/230VAC | |
| OQISH OQIMI | <3.5mayin / 240Bo'shliq | |
| INRUSH CORRENT (maks.) | 40A/115VAC 55A/230VAC | |
| SAMARALIK (Tip. | 80% | |
| Chiqish | NOMONLI HOZIRGI | 32A |
| DC VOLTAJ | 5Voyaga yettirmoq | |
| NOMINAL KUCH | 160V | |
| Joriy diapazon | 0-40A | |
| VOLTAGED ADJ. RANGE | 4.5 ~ 5.6V | |
| RIPPLE & Shovqin (maks.) Eslatma.2 | 150mVp-p | |
| VOLTAGE TOLERANCE Note.3 | ±2,0% | |
| YUKLASHNI TARTIBI | ±1,0% | |
| LINE TARTIBI | ±0,5% | |
| VAQTNI TUTING | 20ms/230VAC 16ms/115VAC at full load | |
| SOZLASH; O'RNATISH, RISE TIME | 1000Xonim, 50ms/230VAC 1000ms,50ms/115VAC at full load | |
| Xavfsizlik | CHORIB KOLGAN VOLTAJ | I / p-o / p:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| XAVFSIZLIK STANDARTLARI | UL60950-1 approved | |
| Izolyatsiyaga qarshilik | I / p-o / p, I / p-fg, O / p-fg:100M Ohms / 500Vdc / 25 / 70% Hazil qilmoq | |
| Environment | ISHLASH NAMLIGI | 20 ~ 90% RH non-condensing |
| ISHLASH TOP | -20 ~ +50 (Refer to output load derating curve) | |
| TEMP. KOeffitsient | ± 0.03% | |
| STORAGE TEMP., NAMLIK | -20 ~ +85 , 10 ~ 95% Hazil qilmoq | |
| VIBRASYON | 10 ~ 500Hz, 3G 10min./1cycle, 60min. har biri X bo'ylab, Y, Z o'qlari | |
| Boshqalar | O'lcham | 215*115*50mm (L * W * H) |
| Mtbf | 271.9K hrs min. MIL-HDBK-217F (25 ) | |
| Eslatma | 1:All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25??of ambient temperature 2:Rippled & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor 3:Tolerance: includes ast up tolerance, line regulation and load regulation 4:Please connect positive pole of input voltage with mark “L??of terminal block, connect negative pole of input voltage with mark “N??of terminal block, using DC voltage for input voltage. |
|
