ขาย!

MeanWell HSP-200-5 Switching LED Panel Power Supply

ราคาเดิมอยู่ที่: $46.25.ราคาปัจจุบันอยู่ที่: $45.00.

-3%

ระบบหน้าจอแสดงผล LED จากผู้ผลิตผนัง LED โดยตรงของจีน.

MeanWell 5V 40A 200W LED power supply (HSP-200-5), LED display power supply for LED screen, 90-264V AC with PFC function No Fan.

 

สอบถามตอนนี้

จัดส่งทั่วโลกทุกคำสั่งซื้อ.

  • 30 วันคืนสินค้าได้ง่าย
  • สั่งซื้อก่อน 14.30 น. จัดส่งให้ในวันเดียวกัน
รับประกันการชำระเงินที่ปลอดภัย

MeanWell HSP-200-5 Switching LED Panel Power Supply.

หมายเลขรุ่น:HSP-200-5.
Case Size:210×62×31mm.
พลัง: 200ว
ประเภทเอาต์พุต:เดี่ยว
กระแสเอาต์พุต:40ก
แรงดันขาออก:5วี
กำลังขับ:101 ??200ว
ความถี่เอาต์พุต:47 ~ 63Hz
แรงดันไฟฟ้าขาเข้า:90~264VAC
การรับรอง:UL TUV CB EMC CE
ประสิทธิภาพ:88.5%
Ouput Voltage Adj.
Range:4.5~5.5V
แอปพลิเคชัน:Industries mechanica automation, ฯลฯ
คุณสมบัติ:Low profile 31mm;พีเอฟซี; เคลือบตามแบบ

MeanWell HSP-200-5 Switching LED Panel Power Supply Product Specifications :

แบบอย่าง HSP-200-5
ป้อนข้อมูล Voltage Range 85~ 264VAC 120~ 370VAC
FREQUENCY RANGE 47 ~ 63Hz
AC CURRENT (ประเภท) 3.5A/115VAC 1.5A/230VAC
กระแสไฟรั่ว <2มิลลิแอมป์ / 240Vac
กระแสไหลเข้า (ประเภท) COLD START 65A/230VAC
ประสิทธิภาพ (ประเภท) 88.5%
เอาท์พุต จัดอันดับปัจจุบัน 40ก
แรงดันไฟฟ้ากระแสตรง 5วี
พลังที่ได้รับการจัดอันดับ 200ว
ช่วงปัจจุบัน 0-40ก
VOLTAGED ADJ. พิสัย 4.5~ 5.5V
ระลอก & เสียงรบกวน (สูงสุด) หมายเหตุ.2 150mVp-p
VOLTAGE TOLERANCE Note.3 ±2.0%
LOAD REGULATION Note.5 ±1.5%
LINE REGULATION Note.4 ±0.5%
รอเวลาไว้ 20ms at full load
การตั้งค่า, RISE TIME 600นางสาว,40ms at full load
การป้องกัน OVER VOLTAGE 5.5~ 7V
ประเภทการป้องกัน :Shut off 0/p volltage, clamping by zener diode
OVER LOAD Above 150% rated output power
ประเภทการป้องกัน :Hiccup mode, recovers automatically after fault condition is removed
ความปลอดภัย ทนต่อแรงดันไฟฟ้า I/ป-โอ/พี:3KVAC I/P-FG:2KVAC O/P-FG:0.5เควีเอซี
SAFETY STANDARDS Note 6 UL60950-1, ซีบี(IEC60950-1),CCC GB4943, 1:2011 ที่ได้รับการอนุมัติ
ความต้านทานการแยกตัว I/ป-โอ/พี, I/P-FG, O/P-FG:100M Ohms / 500กระแสตรง / 25 / 70% RH
มาตรฐานอีเอ็มซี EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254
Environment ความชื้นในการทำงาน 20 ~ 90% RH non-condensing
อุณหภูมิในการทำงาน -20 ~ +70 (Refer to output load derating curve)
อุณหภูมิ. ค่าสัมประสิทธิ์ ± 0.03%
STORAGE TEMP., ความชื้น -40 ~ +85 , 10 ~ 95% RH
การสั่นสะเทือน 10 ~ 500เฮิร์ต, 2G 10min./1cycle, 60นาที. แต่ละคนตาม X, ย, แกน Z
คนอื่น มิติ 215*62*31มม (l*w*h)
MTBF 1608.8K hrs min. MIL-HDBK-217F (25 )
บันทึก ฉัน. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature.
2 ระลอกคลื่น & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor
3. Tolerance : includes set up tolerance. line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% ถึง 100% rated load.
6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion.
7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that
it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies??/ทีดี>

ข้อมูลเพิ่มเติม

น้ำหนัก

1 กก

ผู้ผลิต

มีนเวลล์