Försäljning!

MeanWell HSP-200-5 Switching LED Panel Power Supply

Ursprungligt pris var: $46.25.Nuvarande pris är: $45.00.

-3%

Led display system från direkt Kina led vägg tillverkare.

MeanWell 5V 40A 200W LED power supply (HSP-200-5), LED display power supply for LED screen, 90-264V AC with PFC function No Fan.

 

Fråga nu

Global frakt på alla beställningar.

  • 30 dagar enkla returer
  • Beställ din före 14.30 för leverans samma dag
Garanterat säker utcheckning

MeanWell HSP-200-5 Switching LED Panel Power Supply.

Modellnummer:HSP-200-5.
Case Size:210×62×31mm.
Driva: 200W
Utgångstyp:Enda
Framström:40En
Utspänning:5V
Uteffekt:101 ??200W
Utgångsfrekvens:47 ~ 63Hz
Ingångsspänning:90~264VAC
Certifiering:UL TUV CB EMC CE
Effektivitet:88.5%
Ouput Voltage Adj.
Range:4.5~5,5V
Ansökan:Industries mechanica automation, etc
Särdrag:Low profile 31mm;PFC; Konform belagd

MeanWell HSP-200-5 Switching LED Panel Power Supply Product Specifications :

Modell HSP-200-5
Input Voltage Range 85~ 264VAC 120~ 370VAC
FREQUENCY RANGE 47 ~ 63Hz
AC CURRENT (Typ.) 3.5A/115VAC 1.5A/230VAC
LÄCKSTRÖM <2ma / 240VAC
STRÖM STRÖM (Typ.) COLD START 65A/230VAC
EFFEKTIVITET (Typ.) 88.5%
Produktion NÄRKNINGSAKTUELL 40En
DC SPÄNNING 5V
MÄRK EFFEKT 200W
AKTUELLT OMRÅDE 0-40En
VOLTAGED ADJ. RÄCKVIDD 4.5~ 5.5V
KRUSNING & BULLER (max.) Obs.2 150mVp-p
VOLTAGE TOLERANCE Note.3 ±2,0 %
LOAD REGULATION Note.5 ±1.5%
LINE REGULATION Note.4 ±0,5 %
VÄNTA UPP TID 20ms at full load
INSTÄLLNING, RISE TIME 600ms,40ms at full load
Skydd OVER VOLTAGE 5.5~ 7V
Skyddstyp :Shut off 0/p volltage, clamping by zener diode
OVER LOAD Above 150% rated output power
Skyddstyp :Hiccup mode, recovers automatically after fault condition is removed
Säkerhet TÅR SPÄNNING I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
SAFETY STANDARDS Note 6 UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 godkänd
Isoleringsmotstånd I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500Vdc / 25 / 70% Rod
EMC-STANDARDER EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254
Environment ARBETSFUKTIGHET 20 ~ 90% RH non-condensing
ARBETSTEMP -20 ~ +70 (Refer to output load derating curve)
TEMP. KOEFFICIENT ± 0.03%
STORAGE TEMP., FUKTIGHET -40 ~ +85 , 10 ~ 95% Rod
VIBRATION 10 ~500Hz, 2G 10min./1cycle, 60min. vardera längs X, Y, Z-axlar
Andra DIMENSIONERA 215*62*31mm (L*B*H)
Mtbf 1608.8K hrs min. MIL-HDBK-217F (25 )
Notera jag. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature.
2 Krusning & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor
3. Tolerance : includes set up tolerance. line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% till 100% rated load.
6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion.
7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that
it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies??/td>

Ytterligare information

Vikt

1 kg

Tillverkare

Meanwell