MeanWell HSP-200-5 Switching LED Panel Power Supply.
Numărul modelului:HSP-200-5.
Case Size:210×62×31mm.
Putere: 200W
Tip de ieșire:Singur
Curent de ieșire:40O
Tensiune de ieșire:5V
Putere de ieșire:101 ??200W
Frecvența de ieșire:47 ~ 63Hz
Tensiune de intrare:90~264VAC
Certificare:UL TUV CB EMC CE
Eficienţă:88.5%
Ouput Voltage Adj.
Range:4.5~5.5V
Aplicație:Industries mechanica automation, etc.
Caracteristică:Low profile 31mm;PFC; Conformal coated
MeanWell HSP-200-5 Switching LED Panel Power Supply Product Specifications :
| Model | HSP-200-5 | |
| Intrare | Voltage Range | 85~ 264VAC 120~ 370VAC |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| AC CURRENT (Tip.) | 3.5A/115VAC 1.5A/230VAC | |
| CURENT DE SCURTĂ | <2MA / 240Vac | |
| CURENTUL DE INRUSH (Tip.) | COLD START 65A/230VAC | |
| EFICIENŢĂ (Tip.) | 88.5% | |
| Ieșire | CURENTUL NOMINAT | 40O |
| TENSIUNE DC | 5V | |
| PUTEREA NOMINALA | 200W | |
| GAMA ACTUALA | 0-40O | |
| VOLTAGED ADJ. GAMĂ | 4.5~ 5.5V | |
| CLIPOCI & ZGOMOT (max.) Notă.2 | 150mVp-p | |
| VOLTAGE TOLERANCE Note.3 | ±2,0% | |
| LOAD REGULATION Note.5 | ±1.5% | |
| LINE REGULATION Note.4 | ±0,5% | |
| TIMP DE REȚINERE | 20ms at full load | |
| ÎNFIINȚAT, RISE TIME | 600Domnișoară,40ms at full load | |
| Protecţie | OVER VOLTAGE | 5.5~ 7V Tip de protecție :Shut off 0/p volltage, clamping by zener diode |
| OVER LOAD | Above 150% rated output power Tip de protecție :Hiccup mode, recovers automatically after fault condition is removed |
|
| Siguranţă | RESISTENT LA TENSIUNE | I/P-O/P.:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
| SAFETY STANDARDS Note 6 | UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 aprobat | |
| REZISTENTA DE IZOLARE | I/P-O/P., I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH | |
| STANDARDE EMC | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254 | |
| Mediu | UMIDITATE DE LUCRU | 20 ~ 90% RH non-condensing |
| TEMP | -20 ~ +70 (Refer to output load derating curve) | |
| TEMP. COEFICIENT | ± 0.03% | |
| STORAGE TEMP., UMIDITATE | -40 ~ +85 , 10 ~ 95% RH | |
| VIBRAȚIE | 10 ~ 500 Hz, 2G 10min./1cycle, 60min. fiecare de-a lungul lui X, Y, axele Z | |
| Alţii | DIMENSIUNE | 215*62*31mm (L*L*H) |
| MTBF | 1608.8K hrs min. MIL-HDBK-217F (25 ) | |
| Nota | eu. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature. 2 Clipoci & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Tolerance : includes set up tolerance. line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% la 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies??/TD> |
|
