Colorlight 3D LED Display controller 3D Sender Overview
Video source interfaces | |
Interface type | DVI*1,HDMI*1 |
Rozdzielczość wejściowa | 4096*2160pixels in maximum |
Auto-adjust resolution | Wsparcie |
Video source frame rate | 60Hz,support auto-adjustment |
Kolor wejściowy | 12/10/8fragment |
Wyjście | |
Net port number | 4 gigabit net ports |
Control area by port | 2Tryb D: 2621440 , each port: 655430pikseli; |
3Tryb D 27680 , each port: 1310720pikseli; | |
Odległość transmisji | CAT5E??40M;CAT6 70M;NO limitation on optical fiber |
Kaskadowanie | Support arbitrary cascading between net ports |
Transmission mode | Tryb ramki, CRC check in addition |
Connected equipment | |
Receiver card | 5A series, i5A series, customization cards, itp. |
Urządzenia peryferyjne | Karta wielofunkcyjna, optical fiber transceiver, gigabit switcher |
Specyfikacja | |
Rozmiar | 1Standardowe pudełko |
Napięcie wejściowe | AC 100 ~ 240 V |
Moc znamionowa | 10W |
konsumpcja | |
Waga | 2kg |
Interfejsy zewnętrzne | |
LCD | Show real-time information of screen, help to make quick setting |
of screen | |
Control panel | Rich bottom for quick setting the screen |
Configuration interface | USB 2.0*2 |
DVI information | Obecne informacje na temat liczby klatek na sekundę, wartość wygaszania, zegar, judge status |
between video card and video processor; | |
Kontrola jasności | Adjustment in 100 poziomy, automatically save in sending card. |
Bottom | |
Real-time configuration | Gamma, obszar kontrolny, ustawienie parametrów |
Smart detection system | Temperatura wsparcia, wilgotność , itp. |
Real-time clock | Internal real-time clock, backup battery, total running time can be |
calculated, preset working status in order |
NIE. | Interfejs | funkcje | Noted |
1 | Przełącznik zasilania | power on /off | |
2 | number keypad | 0-9, for the numerical input | |
3 |
LCD |
To show information, such as logo,
running state, itp. |
|
4 |
Function keys |
Extended function, such as Menu
‘black’,‘Fn??function combination key),‘DVI/HDMI??/td> |
|
5 |
Spin bottom |
Used for brightness adjustment
and assisted selection |
|
6 |
Zasilanie |
AC power supply interface
(AC100-240 V) |
|
7 | 3D sync interface | Połącz się z emiterem 3D | |
8 |
Wejście audio |
transmit the audio signal to the
karta wielofunkcyjna |
|
9 | Wejście DVI | DVI signal input | |
10 | Wejście HDMI | Wejście sygnału HDMI | |
11 |
USB 2.0 |
For iQ7E and PC communication or
iQ7E cascade |
|
12 |
Port wyjściowy |
RJ45,4 outputs, connect to receiver
karty |