MeanWell HSP-200-5 Switching LED Panel Power Supply.
Numru tal-Mudell:HSP-200-5.
Case Size:210×62×31mm.
Qawwa: 200W
Tip ta 'ħruġ:Uniku
Kurrent tal-ħruġ:40A
Vultaġġ tal-Output:5V
Qawwa tal-Ħruġ:101 ??200W
Frekwenza tal-ħruġ:47 ~ 63Hz
Vultaġġ tad-Dħul:90~264VAC
Ċertifikazzjoni:UL TUV CB EMC CE
Effiċjenza:88.5%
Ouput Voltage Adj.
Range:4.5~ 5.5V
Applikazzjoni:Industries mechanica automation, eċċ
Karatteristika:Low profile 31mm;PFC; Konformi miksija
MeanWell HSP-200-5 Switching LED Panel Power Supply Product Specifications :
| Mudell | HSP-200-5 | |
| Input | Voltage Range | 85~ 264VAC 120~ 370VAC |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| AC CURRENT (Tip.) | 3.5A/115VAC 1.5A/230VAC | |
| KURRENTI TAT-TAXXA | <2mA / 240VAC | |
| KURRENTI INRUSH (Tip.) | COLD START 65A/230VAC | |
| EFFIĊJENZA (Tip.) | 88.5% | |
| Output | KURRENTI RATED | 40A |
| vultaġġ DC | 5V | |
| QAWWA RATED | 200W | |
| FIRXA KURRENTI | 0-40A | |
| VOLTAGED ADJ. FIRXA | 4.5~ 5.5V | |
| RIPPLE & ĦOSS (max.) Nota.2 | 150mVp-p | |
| VOLTAGE TOLERANCE Note.3 | ±2.0% | |
| LOAD REGULATION Note.5 | ±1.5% | |
| LINE REGULATION Note.4 | ±0.5% | |
| ŻOMM IL-ĦIN | 20ms at full load | |
| SETUP, RISE TIME | 600ms,40ms at full load | |
| Protezzjoni | OVER VOLTAGE | 5.5~ 7V Tip ta' protezzjoni :Shut off 0/p volltage, clamping by zener diode |
| OVER LOAD | Above 150% rated output power Tip ta' protezzjoni :Hiccup mode, recovers automatically after fault condition is removed |
|
| Sigurtà | IL-VOLTAĠĠ JIŻISTGĦU | I / P-O / P.:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
| SAFETY STANDARDS Note 6 | UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 approvati | |
| Reżistenza għall-iżolament | I / P-O / P., I / P-FG, O / P-FG:100M Ohms / 500VDC / 25 / 70% RH | |
| STANDARDS EMC | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254 | |
| Environment | L-UMDITA TA ' XOGĦOL | 20 ~ 90% RH non-condensing |
| XOGĦOL TEMP | -20 ~ +70 (Refer to output load derating curve) | |
| TEMP. KOEFFIĊJENT | ± 0.03% | |
| STORAGE TEMP., L-UMDITÀ | -40 ~ +85 , 10 ~ 95% RH | |
| VIBRAZZJONI | 10 ~ 500Hz, 2G 10min./1cycle, 60min. kull wieħed tul X, Y, assi Z | |
| Oħrajn | DIMENSJONI | 215*62*31mm (L*W*H) |
| Mtbf | 1608.8K hrs min. MIL-HDBK-217F (25 ) | |
| Nota | I. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature. 2 Ripple & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Tolerance : includes set up tolerance. line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% biex 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies??/TD> |
|
