Izpārdošana!

MeanWell HSP-200-5 Switching LED Panel Power Supply

Sākotnējā cena bija: $46.25.Pašreizējā cena ir: $45.00.

-3%

LED displeja ekrāna sistēmas no tiešās Ķīnas LED sienas ražotāja.

MeanWell 5V 40A 200W LED power supply (HSP-200-5), LED display power supply for LED screen, 90-264V AC with PFC function No Fan.

 

Jautājiet tūlīt

Piegāde visā pasaulē visiem pasūtījumiem.

  • 30 dienas viegla atgriešana
  • Pasūtiet savu līdz 14:30, lai to nosūtītu tajā pašā dienā
Garantēta droša izrakstīšanās

MeanWell HSP-200-5 Switching LED Panel Power Supply.

Modeļa numurs:HSP-200-5.
Case Size:210×62×31mm.
Jauda: 200W
Izvades tips:Vientuļa
Izejas strāva:40Izšķirt
Izejas spriegums:5V
Izejas jauda:101 ??200W
Izejas frekvence:47 ~ 63 Hz
Ieejas spriegums:90~264VAC
Sertifikācija:UL TUV CB EMC CE
Efektivitāte:88.5%
Ouput Voltage Adj.
Diapazons:4.5~5,5V
Pieteikums:Industries mechanica automation, utt
Funkcija:Low profile 31mm;PFC; Konformāls pārklājums

MeanWell HSP-200-5 Switching LED Panel Power Supply Product Specifications :

Modelis HSP-200-5
Ievade Sprieguma diapazons 85~ 264VAC 120~ 370VAC
FREKVENČU DARBĪBAS 47 ~ 63 Hz
AC STRĀVA (Tip.) 3.5A/115VAC 1.5A/230VAC
Noplūdes strāva <2maiņa / 240Vakuums
IESLĒGŠANAS STRĀVA (Tip.) COLD START 65A/230VAC
EFEKTIVITĀTE (Tip.) 88.5%
Izvade NOVĒRTĒTA STRĀVA 40Izšķirt
DC SPRIEGUMS 5V
NOMINĀLĀ JAUDA 200W
PAŠREIZĒJAIS DARBALS 0-40Izšķirt
SPRIEGUMA ADJ. RANGE 4.5~ 5.5V
RIPPLE & TROKSNIS (maks.) Piezīme.2 150mVp-p
SPRIEGUMA TOLERANCE Piezīme.3 ±2,0%
LOAD REGULATION Note.5 ±1.5%
LINE REGULATION Note.4 ±0,5%
AIZGAIDI LAIKU 20ms at full load
IESTATĪŠANA, RISE LAIKS 600ms,40ms at full load
Aizsardzība OVER VOLTAGE 5.5~ 7V
Aizsardzības veids :Shut off 0/p volltage, clamping by zener diode
OVER LOAD Above 150% rated output power
Aizsardzības veids :Hiccup mode, recovers automatically after fault condition is removed
Drošība IZTURĒT SPRIEGUMU I/p-o/p:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
SAFETY STANDARDS Note 6 UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 apstiprināts
IZOLĀCIJAS IZTURĪBA I/p-o/p, I/p-fg, O/p-fg:100M omi / 500Vdc / 25 / 70% Rh
EMC STANDARTI EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254
Vide DARBA MITRUMS 20 ~ 90% RH nekondensējošs
DARBA TEMP -20 ~ +70 (Skatiet izejas slodzes samazināšanas līkni)
TEMP. KOEFICIENTS ± 0.03%
UZGLABĀŠANAS TEM., MITRUMS -40 ~ +85 , 10 ~ 95% Rh
VIBRĀCIJA 10 ~ 500 Hz, 2G 10 min./1 cikls, 60min. katrs pa X, Y, Z asis
Citi DIMENSIJA 215*62*31mm (L*P*H)
MTBF 1608.8K st min. MIL-HDBK-217F (25 )
Piezīme es. Al parameters NOT specialy mentioned are measured at 230VAC input. nominālā slodze un 25??no apkārtējās vides temperatūras.
2 Ripple & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor
3. Tolerance : includes set up tolerance. līnijas regulēšana un slodzes regulēšana.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% uz 100% rated load.
6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion.
7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that
it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies??/Td>

Papildus informācija

Svars

1 kg

Ražotājs

Nozīmēt