MeanWell 32A 5V 160W Switching Power Supply (LRS-200E-5).
MEANWell LRS-200E-5 Switching Power Supply LED Display Product Specifications :
| Modell | LRS-200E-5 | |
| Input | Voltage Range (Notegéieren 4) | 180 ~ 264VAC / 180 ~ 264VAC by switch 254 ~ 370VDC |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| AC CURRENT | 4.5A/115VAC 2.5A/230VAC | |
| LEAKAGE AKTUELL | <3.5ma / 240Vaëthin | |
| INRUSH AKTUELL (max.) | 40A/115VAC 55A/230VAC | |
| EFFEKTIVITEIT (Typ. | 80% | |
| Ausgang | AKTUELL BEwäert | 32A K) |
| DC VOLTAGE | 5VR | |
| BEwäert POWER | 160W-W | |
| AKTUELL RANGE | 0-40A K) | |
| VOLTAGED ADJ. RANGE | 4.5 ~ 5.6V | |
| RIPPEL & Kaméidi (max.) Note.2 | 150mvp-p | |
| VOLTAGE TOLERANCE Note.3 | ± 2,0% | |
| LOAD REGULATIOUN | ± 1,0% | |
| LINN REGULATIOUN | ± 0,5% | |
| HOLD UP TIME | 20ms/230VAC 16ms/115VAC at full load | |
| SETUP, RISE TIME | 1000ms, 50ms/230VAC 1000ms,50ms/115VAC at full load | |
| Sécherheet | WEIDER VOLTAGE | Ech / p-o / p:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Sécherheetsnormen | UL60950-1 approved | |
| Isolatioun Widderstand | Ech / p-o / p, Ech / p-fg, O / p-fg:100M Ohms / 500Vdc / 25 / 70% Rh Rh | |
| Environment | SCHAFFT Fiichtegkeet | 20 ~ 90% RH non-condensing |
| SCHAFFT TEMP | -20 ~ +50 (Refer to output load derating curve) | |
| TEMP. COEFFICIENT | ± 0.03% | |
| STORAGE TEMP., Fiichtegkeet | -20 ~ +85 , 10 ~ 95% Rh Rh | |
| VIBRATIOUN | 10 ~500 Hz, 3G 10min./1cycle, 60min. all laanscht X, Y, Z axen | |
| Anerer | DIMENSIOUN | 215*115*50mm (L * w * h) |
| MTBF | 271.9K hrs min. MIL-HDBK-217F Fotoen (25 ) | |
| Notegéieren | 1:All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25??of ambient temperature 2:Rippled & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor 3:Tolerance: includes ast up tolerance, line regulation and load regulation 4:Please connect positive pole of input voltage with mark “L??of terminal block, connect negative pole of input voltage with mark “N??of terminal block, using DC voltage for input voltage. |
|
