Novastar MCTRL R5 LED Display Controller is the first led display controller of NovaStar that supports display rotation. A single Mctrl R5 features a loading capacity of up to 3840×1080@60Hz.
It supports any custom resolutions within this capacity, meeting the on-site configuration requirements of ultra-long or ultra-wide led displays.
Working with the A8s or A10s Plus receiving card, the Mctrl R5 4K Sender supports free screen configuration in SmartLCT and allows for display rotation at any angle to present a variety of images and bring an amazing visual experience to users.
The Novastar Mctrl R5 sending box can be mainly used in rental and fixed applications, 콘서트와 같은, 라이브 이벤트, 모니터링 센터, 올림픽 게임 및 각종 스포츠 센터.
- 입력:
- 1 × 6G-SDI
- 1 × dual link D-DVI
- 1 × HDMI 1.4
- Pixel capacity of each up to 4,140,000 픽셀.
- 출력:
- 8 × Gigabit Ethernet
- 2 × fiber optic outputs.
- Display rotation at any angle.
- Innovative architecture to enable smart configuration and shorter stage preparation time.
- NovaStar G4 engine to enable a stable and smooth display with good sense of depth and no flickering or scanning lines.
- Supports the new generation of NovaStar pixel level calibration technology, 빠르고 효율적입니다.
- Supports quick and easy manual adjustment of screen brightness.
- Supports firmware update via USB port on the front panel.
- Multiple controllers can be cascaded for uniform control.
입력 |
|
| SDI | 6G-SDI 커넥터 |
| HDMI | HDMI1.4 connector |
| DVI | DVI 커넥터 |
산출 |
|
| 1?? | 8 × Neutrik (NE8FBH) 기가비트 이더넷 출력 |
| OPT1?? | 2 × Fiber optical outputs
OPT1은 이더넷 포트에 해당합니다. 1. OPT2 serves as the backup for OPT1. |
제어 |
|
| 이더넷 | PC 연결의 경우 |
| USB 입력 | 계단식 장치용 입력 포트, or for PC connection |
| USB 출력 | 계단식 장치용 출력 포트 |
| 젠록 | |
| 안에 | GENLOCK type: 블랙버스트.
It is the GENLOCK synchronization signal which is used to ensure synchronization between the LED screen display and external GENLOCK source. |
| 고리 | GENLOCK loop output |
Power Connector |
|
| 교류 100-240 V??0/60 헤르츠 | AC 전원 입력 |
| Mctrl R5 Send Controller | ||
| 명세서 | 사용자 매뉴얼 | 펌웨어 |
