MeanWell HSP-200-5 Switching LED Panel Power Supply.
Model Number:HSP-200-5.
Case Size:210×62×31mm.
Hatalom: 200W
Kimeneti típus:Egyetlen
Kimeneti áram:40A
Kimeneti feszültség:5V
Kimeneti teljesítmény:101 ??200W
Kimeneti frekvencia:47 ~ 63Hz
Bemeneti feszültség:90~264VAC
Tanúsítvány:UL TUV CB EMC CE
Hatékonyság:88.5%
Ouput Voltage Adj.
Range:4.5~5,5V
Alkalmazás:Industries mechanica automation, stb
Funkció:Low profile 31mm;ŐRVEZETŐ; Konform bevonattal
MeanWell HSP-200-5 Switching LED Panel Power Supply Product Specifications :
Modell | HSP-200-5 | |
Bemenet | Voltage Range | 85~ 264VAC 120~ 370VAC |
FREQUENCY RANGE | 47 ~ 63Hz | |
AC CURRENT (Typ.) | 3.5A/115VAC 1.5A/230VAC | |
SZIVÁRGÁSI ÁRAM | <2majom / 240VAKÁCIÓ | |
INRUSH CURRENT (Typ.) | COLD START 65A/230VAC | |
HATÉKONYSÁG (Typ.) | 88.5% | |
Kimenet | BESZÁMÍTOTT ÁRAM | 40A |
DC FESZÜLTSÉG | 5V | |
NÉVLEGES TELJESÍTMÉNY | 200W | |
AKTUÁLIS TARTOMÁNY | 0-40A | |
VOLTAGED ADJ. HATÓTÁVOLSÁG | 4.5~ 5.5V | |
FODROZÓDÁS & ZAJ (max.) Megjegyzés.2 | 150mVp-p | |
VOLTAGE TOLERANCE Note.3 | ±2,0% | |
LOAD REGULATION Note.5 | ±1.5% | |
LINE REGULATION Note.4 | ±0,5% | |
TARTSA KI IDŐT | 20ms at full load | |
BEÁLLÍTÁS, RISE TIME | 600SM,40ms at full load | |
Védelem | OVER VOLTAGE | 5.5~ 7V Védelem típusa :Shut off 0/p volltage, clamping by zener diode |
OVER LOAD | Above 150% rated output power Védelem típusa :Hiccup mode, recovers automatically after fault condition is removed |
|
Biztonság | FESZÜLTSÉG ELLENI | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
SAFETY STANDARDS Note 6 | UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 jóváhagyott | |
SZIGETELÉS ELLENÁLLÁS | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% Reviz | |
EMC-SZABVÁNYOK | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254 | |
Environment | MŰKÖDÉSI PÁRA | 20 ~ 90% RH non-condensing |
MŰKÖDÉSI HŐM | -20 ~ +70 (Refer to output load derating curve) | |
TEMP. EGYÜTTHATÓ | ± 0.03% | |
STORAGE TEMP., NEDVESSÉG | -40 ~ +85 , 10 ~ 95% Reviz | |
REZGÉS | 10 ~ 500 Hz, 2G 10min./1cycle, 60min. mindegyik X mentén, Y, Z tengelyek | |
Mások | DIMENZIÓ | 215*62*31mm (L*Sz*H) |
MTBF | 1608.8K hrs min. MIL-HDBK-217F (25 ) | |
Jegyzet | én. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature. 2 Fodrozódás & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Tolerance : includes set up tolerance. line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% hogy 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies??/Td> |