MeanWell LRS-200E-5 LED-Display-Netzteil, Schaltnetzteil.
| Modell | LRS-200E-5 | |
| Eingang | Voltage Range (Notiz 4) | 180 ~ 264VAC / 180 ~ 264VAC by switch 254 ~ 370VDC |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| AC CURRENT | 4.5A/115VAC 2.5A/230VAC | |
| Leckstrom | <3.5ma / 240VAC | |
| EINSCHALTSTROM (max.) | 40A/115VAC 55A/230VAC | |
| EFFIZIENZ (Typ. | 80% | |
| Ausgabe | Nennstrom | 32A |
| Gleichspannung | 5V | |
| Nennleistung | 160W | |
| AKTUELLER BEREICH | 0-40A | |
| VOLTAGED ADJ. REICHWEITE | 4.5 ~ 5.6V | |
| WELLE & LÄRM (max.) Hinweis.2 | 150mVp-p | |
| VOLTAGE TOLERANCE Note.3 | ±2,0 % | |
| LASTREGELUNG | ±1,0 % | |
| LINIENREGELUNG | ±0,5 % | |
| ZEIT HALTEN | 20ms/230VAC 16ms/115VAC at full load | |
| AUFSTELLEN, RISE TIME | 1000MS, 50ms/230VAC 1000ms,50ms/115VAC at full load | |
| Sicherheit | SPANNUNG BESTÄNDIG | I/p-o/p:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| SICHERHEITSSTANDARDS | UL60950-1 approved | |
| ISOLATIONSWIDERSTAND | I/p-o/p, I/p-fg, O/p-fg:100M Ohms / 500VDC / 25 / 70% Rh | |
| Environment | ARBEITSFEUCHTIGKEIT | 20 ~ 90% RH, nicht kondensierend |
| ARBEITSTEMPERATUR | -20 ~ +50 (Refer to output load derating curve) | |
| TEMP. KOEFFIZIENT | ± 0.03% | |
| STORAGE TEMP., LUFTFEUCHTIGKEIT | -20 ~ +85 , 10 ~ 95% Rh | |
| VIBRATION | 10 ~ 500 Hz, 3G 10min./1cycle, 60min. jeweils entlang X, Y, Z-Achsen | |
| Andere | DIMENSION | 215*115*50mm (L*B*H) |
| MTBF | 271.9K hrs min. MIL-HDBK-217F (25 ) | |
| Notiz | 1:All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25??of ambient temperature 2:Rippled & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor 3:Tolerance: includes ast up tolerance, line regulation and load regulation 4:Please connect positive pole of input voltage with mark “L??of terminal block, connect negative pole of input voltage with mark “N??of terminal block, using DC voltage for input voltage. |
|
MeanWell LRS-200E-5 LED-Display-Netzteil, Schaltnetzteil.
