MeanWell HSP-200-5 Switching LED Panel Power Supply.
Model Number:HSP-200-5.
Case Size:210×62×31mm.
Leistung: 200W
Ausgangstyp:Einzel
Ausgangsstrom:40A
Ausgangsspannung:5V
Ausgangsleistung:101 ??200W
Ausgangsfrequenz:47 ~ 63Hz
Eingangsspannung:90~264VAC
Zertifizierung:UL TUV CB EMC CE
Effizienz:88.5%
Ouput Voltage Adj.
Reichweite:4.5~5,5V
Anwendung:Industries mechanica automation, usw
Besonderheit:Low profile 31mm;PFC; Schutzbeschichtet
MeanWell HSP-200-5 Switching LED Panel Power Supply Product Specifications :
| Modell | HSP-200-5 | |
| Eingang | Spannungsbereich | 85~ 264VAC 120~ 370VAC |
| FREQUENZBEREICH | 47 ~ 63Hz | |
| Wechselstrom (Typ.) | 3.5A/115VAC 1.5A/230VAC | |
| Leckstrom | <2ma / 240Vac | |
| EINSCHALTSTROM (Typ.) | COLD START 65A/230VAC | |
| EFFIZIENZ (Typ.) | 88.5% | |
| Ausgabe | Nennstrom | 40A |
| Gleichspannung | 5V | |
| Nennleistung | 200W | |
| AKTUELLER BEREICH | 0-40A | |
| SPANNUNGSANPASSUNG. REICHWEITE | 4.5~ 5.5V | |
| WELLE & LÄRM (max.) Hinweis.2 | 150mVp-p | |
| SPANNUNGTOLERANZ Hinweis.3 | ±2,0 % | |
| LOAD REGULATION Note.5 | ±1.5% | |
| LINE REGULATION Note.4 | ±0,5 % | |
| ZEIT HALTEN | 20ms at full load | |
| AUFSTELLEN, AUFSTIEGZEIT | 600MS,40ms at full load | |
| Schutz | OVER VOLTAGE | 5.5~ 7V Schutzart :Shut off 0/p volltage, clamping by zener diode |
| OVER LOAD | Above 150% rated output power Schutzart :Hiccup mode, recovers automatically after fault condition is removed |
|
| Sicherheit | SPANNUNG BESTÄNDIG | I/p-o/p:3Kvac I / P-FG:2KVAC O / P-FG:0.5KVAC |
| SAFETY STANDARDS Note 6 | UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 genehmigt | |
| ISOLATIONSWIDERSTAND | I/p-o/p, I/p-fg, O/p-fg:100MOhm / 500VDC / 25 / 70% Rh | |
| EMV-STANDARDS | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254 | |
| Umfeld | ARBEITSFEUCHTIGKEIT | 20 ~ 90% RH, nicht kondensierend |
| ARBEITSTEMPERATUR | -20 ~ +70 (Siehe Ausgangslast-Derating-Kurve) | |
| TEMP. KOEFFIZIENT | ± 0.03% | |
| LAGERTEMP., LUFTFEUCHTIGKEIT | -40 ~ +85 , 10 ~ 95% Rh | |
| VIBRATION | 10 ~ 500 Hz, 2G 10 Min./1 Zyklus, 60min. jeweils entlang X, Y, Z-Achsen | |
| Andere | DIMENSION | 215*62*31mm (L*B*H) |
| MTBF | 1608.8K Std. min. MIL-HDBK-217F (25 ) | |
| Notiz | ICH. Al parameters NOT specialy mentioned are measured at 230VAC input. Nennlast und 25??der Umgebungstemperatur. 2 Welligkeit & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Toleranz : includes set up tolerance. Leitungsregulierung und Lastregulierung. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% Zu 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies??/td> |
|
