MEANWell NEL-400-5 Switching Power Supply Manufacturer.
Størrelse:215×115×30 mm.
Magt: 400W.
Høj effektivitet op til 90%.
Indbygget aktiv PFC-funktion, PF>0.95.
LED-indikator for tænding.
Forced air cooling by built in DC Fan with fan speed control function.
1U lavprofil 30mm
Høj effektivitet, Long life and high reliability
Beskyttelser: Kortslutning / Overbelaste / Overspænding / over temperatur
1 års garanti
MEANWell NEL-400-5 Switching Power Supply Manufacturer Product Specifications :
| Model | NEL-400-5 | |
| Input | Voltage Range | 85~ 264VAC 120~ 370VAC |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| AC CURRENT (Typ.) | 3.5A/115VAC 1.5A/230VAC | |
| LÆKSTRØM | <2Ma / 240Vac | |
| INDSTRØM (Typ.) | COLD START 65A/230VAC | |
| EFFEKTIVITET (Typ.) | 84% | |
| Produktion | MÆRKET AKTUEL | 80EN |
| DC SPÆNDING | 5V | |
| MÆRKEMÆRK | 400W | |
| NUVÆRENDE OMRÅDE | 0-80EN | |
| VOLTAGED ADJ. RÆKKEVIDDE | 4.5~ 5.5V | |
| RIPPLE & STØJ (max.) Bemærk.2 | 150mVp-p | |
| VOLTAGE TOLERANCE Note.3 | ±2,0 % | |
| LOAD REGULATION Note.5 | ±1.5% | |
| LINE REGULATION Note.4 | ±0,5 % | |
| HOLD OP TID | 20ms at full load | |
| OPSÆTNING, RISE TIME | 600ms,40ms at full load | |
| Beskyttelse | OVER VOLTAGE | 5.6~ 7V Beskyttelsestype :Shut off 0/p volltage, clamping by zener diode |
| OVER LOAD | Above 150% rated output power Beskyttelsestype :Hiccup mode, recovers automatically after fault condition is removed |
|
| Sikkerhed | TÅSTÅ SPÆNDING | I/p-o/p:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
| SAFETY STANDARDS Note 6 | UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 godkendt | |
| ISOLERINGSMODSTAND | I/p-o/p, I/p-fg, O/p-fg:100M Ohms / 500VDC / 25 / 70% Rh | |
| EMC STANDARDER | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254 | |
| Environment | ARBEJDSFUGT | 20 ~ 90% RH non-condensing |
| ARBEJDSTEMP | -20 ~ +70 (Refer to output load derating curve) | |
| TEMP. KOEFFICIENT | ± 0.03% | |
| STORAGE TEMP., FUGTIGHED | -40 ~ +85 , 10 ~ 95% Rh | |
| VIBRATION | 10 ~500Hz, 2G 10min./1cycle, 60min. hver langs X, Y, Z-akser | |
| Andre | DIMENSION | 215*115*30mm (L*B*H) |
| MTBF | 1608.8K hrs min. MIL-HDBK-217F (25 ) | |
| Note | jeg. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature. 2 Ripple & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Tolerance : includes set up tolerance. line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% til 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies. |
|
